#Clone mac hard drive to ssd bootable install#
#Clone mac hard drive to ssd bootable Pc#
#Clone mac hard drive to ssd bootable iso#

Notice: This procedure will write the Home Assistant Operating System onto your device. Use this method only if Method 1 does not work for you. Method 2: Installing HAOS directly from a boot medium To use it, proceed as described under start up your generic x86-64.Your Home Assistant server is now set up and you can start using it.Once Ubuntu has been shut down, remove the USB flash drive (Ubuntu will inform you when this is the case).Once the Home Assistant Operating System is installed, shut down the system.The Home Assistant Operating System is now being installed on your system.In the partitions overview, you should now see the restore operation in progress.

#Clone mac hard drive to ssd bootable install#

Go back to step 3 and during start up, make sure you select Try Ubuntu (and NOT Install Ubuntu).Instead, you need to run it on your stick. Most likely, you are running Ubuntu on your internal disk.If you are getting an Error unmounting filesystem error message, stating that the target is busy:.On top of the screen, select the three dots menu and select Restore Disk Image….In Disks, on the left side, select the internal disk device you want to install HAOS onto.

In the applications, search and open Disks and start restoring the HAOS image:.

In Ubuntu, in the bottom left corner, select Show Applications.

In Ubuntu, open a browser and open the current documentation page, so you can follow the steps.

Connect your system to your network and make sure it has internet access.

This runs Ubuntu on the USB flash device.

When prompted, make sure to select Try Ubuntu.

You might need to adjust boot order or use F10 (might be a different F-key depending on the BIOS) to select the USB flash drive as boot device.

Insert the USB flash drive into the system on which you want to run Home Assistant.

#Clone mac hard drive to ssd bootable iso#

Follow the Ubuntu instructions on writing an Ubuntu iso file onto a USB device.

Create a live operating system on a USB flash drive:.

Back up your data before carrying out this procedure.

This means you will lose all the data as well as the previously installed operating system.

Notice: This procedure will write the Home Assistant Operating System onto your device.

To install HAOS via Ubuntu from a USB flash drive

USB flash drive (USB thumb drive is sufficient, it should be at least 4 GB in size).

The target x86-64 hardware, on which you want to install the Home Assistant Operating System (HAOS).

Method 1: Installing HAOS via Ubuntu booting from a USB flash drive Required material If you have non-removable internal mediums (for example because you are using a laptop) or do not have the necessary adapter (for example an USB to S-ATA adapter) use method 1 instead. Method 2: With this method, you write the Home Assistant Operating disk image directly onto a boot medium from your regular computer. It also works on laptops and PCs with internal hard disks. Method 1 (recommended): Boot Ubuntu from a USB flash drive and install the Home Assistant Operating System from there. To write the HAOS image to the boot medium on your x86-64 hardware, there are 2 different methods: Alternatively, an external medium can be used such as a USB SDD, though this is not recommended. Typically, an internal medium like S-ATA hard disk, S-ATA SSD, M.2 SSD, or a non-removable eMMC is used for the x86-64 boot medium.

You will write it manually using either the Disks utility from Ubuntu or Balena Etcher. HAOS has no integrated installer that writes the image automatically. Next, you need to write the Home Assistant Operating System image to the boot medium, which is the medium your x86-64 hardware will boot from when it is running Home Assistant. To enter the BIOS, start up your x86-64 hardware and repeatedly press the F2 key (on some systems this might be Del, F1 or F10). However, the options should still be present and named similarly. The BIOS menu will likely look different on your system. The following screenshots are from a 7th generation Intel NUC system. To boot Home Assistant OS, the BIOS needs to have UEFI boot mode enabled and Secure Boot disabled. Then, write the Home Assistant Operating System disk image to your boot medium.Ĭonfigure the BIOS on your x86-64 hardware.

#Clone mac hard drive to ssd bootable Pc#

First, you will need to configure your Generic x86-64 PC to use UEFI boot mode.Most systems produced in the last 10 years support the UEFI boot mode.The system must be 64-bit capable and be able to boot using UEFI.This is typically an Intel or AMD-based system.This guide assumes that you have a dedicated Generic x86-64 PC to exclusively run the Home Assistant Operating System.